SX3671MW
Foreign objects undetectable by the conventional X-ray can be detected!
Model:
SX3671MW
Category:
X-ray Inspection System
Technical specifications.
Equipped with a high-precision dual energy sensor
It is possible to float up only the foreign objects by performing image processing based on the X-ray images of two different energy bands. Due to this mechanism, high-precision inspection of foreign objects can be achieved
Detection of minute foreign objects achieved with high precision
Minute foreign objects of 0.127mm high and 0.14mm wide can be detected from pharmaceutical raw material powder in a bag. In the test using a sample product, a highly reliable result of 10 successful detections out of 10 times was obtained.
Specifications
| Model | SX3671MW |
|---|---|
| Dimension of inspection product | Maximum passage width 330mm, Maximum passage height 100mm |
| Max. inspectable width (on the belt surface) | 330mm |
| Transport belt speed | 15-45m/min *1 |
| Weight capacity | 10kg |
| Detection sensitivity | φ0.2mm iron or stainless ball, stone, glass, hard bone, and high density plastic pieces, etc. *2 |
| Display unit | 12.1 inches-wide TFT color LCD (with touch panel) |
| Structure | Main unit/Base: All-stainless (SUS304) Waterproof structure: Main unit equivalent to IP66（excluding the cooler） |
| Pass line | 750±50mm |
| Max. X-ray output | Tube voltage: 75kV Tube current: 8.0mA (Max : 300W) |
| Operating environment | Temperature: 0 to 35℃, Humidity: 30 to 85%, No dew condensation allowed. (It is necessary to clean the filter periodically.) |
| Main power supply | AC200V±10% 2.8kVA 50/60Hz |
*1 For other transport belt speed, contact System Square Inc.
*2 The detection capability may vary depending on the inspection product and operating environment.
* Appropriate options may be separately needed in the following cases: Large temperature deviation in the installation location, high humidity, too cold or too hot object to be inspected.
Detection errors reduced by accurate identification of overlapped products
Minute foreign objects of 0.127mm high and 0.14mm wide can be detected from pharmaceutical raw material powder in a bag. In the test using a sample product, a highly reliable result of 10 successful detections out of 10 times was obtained.
Appearance figure
HABEN SIE NOCH FRAGEN?
Bitte zögern Sie nicht, uns bei jeder Gelegenheit zu kontaktieren